Case Study: Myenergi Zappi EV Charger Installation, North Richmond Saunders Electrical Group installed a Myenergi Zappi multiphase EV charger in a detached garage in North Richmond — routing a dedicated 32A single-phase circuit through a double cavity wall and along a surface-mounted conduit run, after site conditions ruled out both underground trenching and overhead catenary […]
Case Study: 12-Room Accommodation Electrical Refurb at Darlo Bar, Darlinghurst Saunders Electrical Group delivered a full electrical refurbishment across all 12 upstairs guest rooms, 5 bathrooms, and communal areas at Darlo Bar in Darlinghurst, in partnership with hospitality group Solotel — completed in three staged visits over roughly three weeks to work around a live, […]
Why Insulated Pergola and Patio Roofs Need Purple V90-Rated Cable Standard white TPS electrical cable degrades over time inside an insulated pergola or patio roof panel — purple, non-migratory, V90-rated cable is the correct choice instead. Saunders Electrical Group (Contractor Licence 344815C) uses correctly specified cable on every insulated roof installation across the Hills District […]
If you’ve got a metal pillar box near the end of your driveway, that’s your private electrical pillar — the point where the underground supply from the street connects to your home’s switchboard. It’s not decorative, and it’s not council property. It’s yours to maintain, and a damaged one can knock out power to the […]
About two in three homeowners who call us about a tripping circuit can actually fix it themselves — and we’d rather tell you that upfront than have you pay a call-out fee for something you can sort in five minutes. I’m Oliver from Saunders Electrical Group. Here’s the exact process, the same one I walk […]
Smoke Alarm Beeping? Here’s What to Do A smoke alarm that beeps or chirps — either constantly or every 30 to 60 seconds — is one of the more annoying sounds a home can produce. It usually kicks off at 2am. And it’s almost always trying to tell you something specific. Saunders Electrical Group attends […]
Most homeowners don’t think about their switchboard until something goes wrong. But by the time there’s a problem — a tripped circuit that won’t reset, a burning smell near the meter box, or an electrician flagging an issue during another job — the board has often been overdue for attention for years. Here are the […]
A residential switchboard upgrade in NSW typically costs between $1,500 and $3,500 + GST. That’s the honest answer for most homes in the Hills District and Hawkesbury. What sits inside that range — and what pushes a job toward the higher end — depends on a handful of specific factors that are worth understanding before […]
If your home was built before 1990 and the switchboard has never been replaced, there’s a reasonable chance the backing board inside the enclosure — the panel that the fuses or circuit breakers are mounted onto — contains asbestos. It’s something we come across regularly on switchboard upgrade jobs across the Hills District and Hawkesbury, […]
Most home EV charger installations in the Hills District take between two and four hours from the time we arrive to the time we leave. That’s the honest answer. But what sits inside that window — and what can push a job longer — is worth understanding before you book. Here’s what’s actually involved, based […]



