DC vs AC Ceiling Fans: What Actually Matters (Not What the Fan Shops Tell You) About 9 in 10 ceiling fans we install or replace across the Hills District and Hawkesbury are now DC motor units. But if you’ve been reading up on DC vs AC before you buy, you’ve probably only seen the retailer […]
The right EV charger for your home is decided by two things most buying guides never ask about: how fast your car can actually accept AC power, and whether your roof has solar on it. At Saunders Electrical Group, we’ve completed more than 70 EV charger installations across the Hills District and Hawkesbury — over […]
If your BYD Sealion is charging slowly on the cable that came with the car, the charger isn’t the problem — the car is. Every BYD Sealion has a built-in limit on how fast it can accept AC power, and the portable charger BYD supplies is rated well below that limit. Saunders Electrical Group (Electrical […]
If your LED downlights are flickering, buzzing, or won’t dim below a certain point, the globe is almost never the problem. In the vast majority of cases we see across Sydney’s Hills District, the fault sits in the dimmer switch — specifically, an old dimmer that was never designed to control an LED load in […]
A Kellyville homeowner recently contacted us to install a Tesla Wall Connector to match his new Tesla, currently on order. It’s usually a straightforward job — but a few questions into the site assessment, we caught a mismatch before it reached the switchboard. Here’s why, and what it means if you’ve already got solar or […]
A German testing body just put hard numbers on something Hills District EV owners have been guessing at for years: charging straight off a household power point doesn’t just take longer — it wastes real electricity, and the waste is bigger than most people assume. ADAC, Germany’s largest motoring club, tested five EV models across […]
Buying an EV and wondering what a home charger install actually involves? Saunders Electrical Group installs EV chargers across Kenthurst, Castle Hill, Baulkham Hills, Rouse Hill, Windsor and Richmond, and these are the questions we get asked most before homeowners have even picked a car. Licensed under NSW Electrical Contractor Licence 344815C. Can my home […]
An RCD that won’t reset almost always gets blamed on the switchboard. In our experience fault-finding these calls across the Hills District and Hawkesbury, the switchboard is rarely the problem — it’s usually something plugged into it. We had a call-out that proved it. A Rouse Hill customer lost power to a large section of […]
An EV charger that turns on and charges the car isn’t necessarily installed correctly — especially if it’s a myenergi Zappi and it isn’t set up to talk to your solar system. Saunders Electrical Group recently helped a Toongabbie customer whose Zappi wasn’t integrating with his solar system, after he’d gone with a cheaper quote […]
A ceiling fan that suddenly stops working a few weeks after installation isn’t always a faulty fan. Saunders Electrical Group was called to a property in Annangrove where a ceiling fan on a pitched pergola ceiling, fitted with an extension rod, had stopped working shortly after being installed by another contractor. The cause wasn’t the […]









